Raspberry Pi IoT connect CloudMQTT

Raspberry Pi IoT connect CloudMQTT

In Last Article we have made raspberry pi with dht sensor and OLED display. So, in this blog we will use that hardware to connect CloudMQTT.com for IoT application.

What is MQTT?

MQTT (aka MQ Telemetry Transport) is a machine-to-machine or “Internet of Things” connectivity protocol on top of TCP/IP. It allows extremely lightweight publish/subscribe messaging transport.


Broker , Publisher , Subscriber

CloudMQTT are managed Mosquitto servers in the cloud. Mosquitto implements the MQ Telemetry Transport protocol, MQTT, which provides lightweight methods of carrying out messaging using a publish/subscribe message queueing model.
So , you must sign up CloudMQTT

System Diagram

Hardware

• Raspberry Pi Board ( we use Raspberry Pi3 board ) + SD card (8GB or more) we use 16 GB
• DHT11 Temperature and Humidity Sensor with Resistor 4.7 K Ohm
• I2C OLED Display ( 128 x 64 0.96' SSD1306 chip )

Wiring Diagram

Python Library

DHT Sensor
$ git clone https://github.com/adafruit/Adafruit_Python_DHT.git
$ cd Adafruit_Python_DHT
$ sudo apt-get install build-essential python-dev python-openssl
$ sudo python setup.py install

OLED
$ git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git
$ cd Adafruit_Python_SSD1306
$ sudo python setup.py install


Source Code
https://github.com/amphancm/RaspberryPi_CloudMQTT
Reference
CloudMQTT Document https://www.cloudmqtt.com/docs.html
OLED Adafruit Python Library https://github.com/adafruit/Adafruit_Python_SSD1306

My Website

http://softpowergroup.net/

email : info@softpowergroup.net   Tel .081-6452400

Google+  https://plus.google.com/+SoftpowergroupNetThailand/

Android and Arduino IoT

Android Arduino Control Hardware

LINE : adunfong
FaceBook : https://www.facebook.com/adun.nantakaew
email: amphancm@gmail.com